1.SQUARE PIPE ENDS AND REMOVE ALL BURRS AND DIRT.

2.CLAEN PIPE AND FITTING.

3.APPLY LIBERAL COAT OF CEMENT TO THE DEPTH OF SOCKET

4.APPLY A THIN COAT OF CEMENT TO INSISE OF FITTING

5.ASSEMBLE PARTS QUICKLY. CEMENT MUST BE FLUID. IF CEMENT SURFACE HAS DRY, RECOAT BOTH PARTS

6.PUSH PIPE FULLY INTO FITTINGUSING A 1/4TURNING MOTION UNTIL PIPE BOTTOM

7.HOLD PIPE AND FITTING TOGETHER FOR 30 SECONDS TO PREVENT PIPE PUSH-OUT, WIPE OFF EXCESS.

8.ALLOW 15 MINUTES FOR GOODING HANDLING STRENGTH AND 2 HOURS CURE TIME.